AGM Pvc Cleaner

GENERAL DESCRIPTION:

AGM Universal Cleaner No. 970 is a special blend of solvents formulated to clean PVC, CPVC, ABS and Styrene Pipes & Fittings, all schedules and all diameters, prior to applying cement. This Pipe Cleaner will effectively remove oils, dirt, grease and other foreign matter from the surface of pipe and inside of fitting. It is very important that the surface of pipe and inside of fitting is clean for a strong leak proof joint. This product is made in the U.S.A.

 

APPLICATION:

AGM Universal Cleaner may be used on PVC, CPVC, ABS and Styrene. Use applicator supplied with can or suitable applicator or clean cloth

  • Application temperature: 10 degree F to 120 degree F
  • Storage temperature: -10 degree F to 110F degree F

 

PHYSICAL PROPERTIIES:

Appearance: Liquid
Color: Clear
Shelf Life: Unlimited (Unopened can)

DIRECTION FOR USE:

Keep container closed when not in use

1. Cut pipe square with saw or hand cutter. Remove all burrs

2. 3. Check dry fit of pipe and fitting. Pipe should easily go 1/3 to ½ ways into fitting. If pipe bottoms into fitting it should be very snug

3. Use applicator supplied with the can or suitable applicator at least ½ the size of the pipe diameter

4. Apply Liberal coat the pipe (at least equal to depth of fitting) and inside of fitting.

5. Wipe off with clean dry cloth.

6. Use appropriate cement for pipe being joined.

 

agm pvc cleaner

DIRECTION FOR USE:

Keep container closed when not in use

1. Apply Pipe Cleaner with dauber or suitable applicator or clean cloth

2. Wipe off Pipe Cleaner with Clean Dry cloth

3. Apply Cement according to instruction on Cement label

 

AVAILIBILITY

 SIZE PART NO UNITS/CARTON
4 Fluid Oz / 120ml 712004 24 Can with brush in cap
8 Fluid Oz / 237ml 712008 24 Can with brush in cap
16 Fluid Oz / 437ml 712016 12 Can with brush in cap
32 Fluid Oz / 947ml 712032 12 Can with brush in cap

PRECAUTIONS:

EXTREMELY FLAMMABLE LIQUID, VAPOR MAY IRRITATE EYE OR SKIN, MAY CASUE FLASH FIRE, MAY BE HARMFUL OR FATAL IF SWOLLOWED. DO NOT USE NEAR HEAT, SPARKS AND FLAMES. KEEP OUT OF REACH OF CHILDREN

Ensure adequate ventilation to avoid vapor build up which may cause flash fire. Vapor build up may also cause dizziness, headache or eye watering. If symptoms are experienced use respiratory protection or leave area and provide more fresh air. Avoid contact with eyes, skin and clothing. Do not smoke and wear protective equipment while using

FIRST AID:

Inhalation: If breathing is difficult vacate to fresh air. If breathing problems persist seek immediate medical attention.

Eye Contact: Flush eyes thoroughly with water for 15 minutes. Seek immediate medical attention.

Ingestion: If swallowed, give 1-2 glasses of water immediately, call physician, hospital or poison control center immediately. DO NOT INDUCE VOMITING

SPILL: Remove all source of ignition and ventilate area. Soak up spill with absorbent material. Dispose of absorbent material in accordance with regulations. Personnel cleaning the spill should wear appropriate protective equipment.

WARRANTY: WARRANTY IS LIMITED TO REPLACEMENT OF DEFECTIVE MERCHANDISE